Ubiquiti UniFi G6 Pro 360 Angled Wall Mount - Ceiling - 15 Degree - Short to 3 in Extension

Angled wall and ceiling mount for the Ubiquiti UniFi Protect G6 Pro 360 (UVC-G6-Pro-360). The 15 degree wedge aims the camera down the wall or along it, and the extension moves the camera out past siding, trim and gutters. Pick your extension below.

Extension:

• Short
• 1 inch
• 1.5 inch
• 2 inch
• 2.5 inch
• 3 inch

Cable channel knockouts on the wall side let you route the cable out the side instead of through the wall.

Included: the printed mount and 3 drywall screws. The camera's own mounting plate attaches to the mount with the camera's screws. Camera not included.

Self-centering screw bores. Each mounting screw drives through a bore in the mount body. The top of the bore is a cone that funnels the screw tip to the hole and centers it, and a thin sacrificial layer over the hole holds the screw upright until the driver engages. Drop the screw in, seat the bit, and drive: the screw stays put even with the mount, the driver, and the camera overhead on a ladder.

Materials & Colors:

• White PETG
• Black PETG
• Carbon Fiber PETG

PETG is a tough, impact-resistant plastic with excellent moisture, chemical, and UV resistance for long-lasting real-world use.

3D printed to order in the color you pick.

Message me about quantity discounts